EasyIO-30P-SF

• Sedona Framework™
  Supports the newest, Sedona Framework™ which is the industry’s first, open source development framework that provides a complete software platform for developing, deploying, integrating, and managing pervasive device applications at the lowest level. The Sedona Framework™ distributes decision making control and manageability to any device and brings intelligence and connectivity to the network edge and back. Now, system integrator is able to develop theirs own application based on the Sedona Framework™.




• Web Browser Configuration
  Built-in Web server enables configuration with popular web browser over an Ethernet connection. I/O status can be monitored over the Internet connection.




• High-Speed Data Rates
  Multiple serial communication (RS485) speed selection from 9.6kbps to 115.2kbps. Supports Ethernet 10Base-T/ 100Base-T interface, half or full duplex.




• As Bridge Controller
  The controller can be configured as Bridge Controller providing a network bridge for Ethernet and serial communication (RS485) via built-in protocol converter (for Modbus only). This will reduce wiring cost, simplify network mplementation and significant cost




• Device ID
  Complementing existing standard protocols, EasyIO-30P can be uniquely identified over the network. This facilitating online network device search and simplify reconfiguration.




• Network Security
  All configurations changes are protected via password setting, either through standard network protocol access (Modbus) or web

• Multiple Input/Output Type
  The controller has eight Digital Inputs, eight Analogue Input for current, voltage, resistance and temperature sensor, eight Digital Outputs (relay), four Analogue Output (current and voltage), and
  two isolated Open Collector outputs (with PWM control) for high




• High Accuracy Analogue Channels
  High speed 14-bits A/D converter with programmable gain amplifier yields a high resolution and accuracy reading on a12na-bliotgsuDe/iAnppruotvpiodienstsm.ore accurate analogue output control.




• Online Help/Information
  All related information/helps are available through the controller web server. Information such as registers details, wiring diagram, device specification and etc are provided to assist the user.




• Status Indicator
  Operational activity on each individual channel of DI, DO and Open Collector Outputs (PWM) are conveniently indicated by LED, so as the Power, Operation, Communication and Faults status.




• Reset
  A Reset Switch has been provided for system reset without power removal (WarmStart operation).




• Online Firmware Upgrade/Configuration
  The controller firmware can be upgraded either through RS485 or Ethernet connection. Network communication and operation parameters can be changed via RS485/Ethernet with the built-in boot-loader and terminal program.

Device Specifications

Built In Function Blocks

Electrical
Power Supply: 24VAC, 3.6VAmax, or 20 ~34VDC
Consumption: 150mAmax@24VDC
Operating Temperature: 32° to 150° F (0° to 65° C)
Storage Temperature: -4° to 150° F (-20° to 65° C)
Operating Humidity: 10% to 95% relative humidity non-condensing

Communication

Physical Interface 1 (Port 1):

• EIA-485 (BUS A,B) Two-wire
• HalfDuplex
• Baud Rate Speed: (9.6K, 19.2k, 38.4K, 115.2K bit/s)
• Data Bit: (8 bits)
• Parity: (None, Even, Odd)
• Application Protocol: BacnetMSTP,Modbus Serial
• Multi-drop Capability: Yes, Slave (hardware ID setting)

Physical Interface 2 (Port 2):

• Ethernet 10/100 Base-T
• Ethernet Support: IP,TCP,UDP,ICMP,IGMP,FTP,HTTP
• Application Support: Bacnet IP, Bacnet Ethernet,Modbus TCP and Sedona Sox.

Input/Output Configuration

Universal Input:

• 8 Channels
• Voltage: 0 - 10V (+/-0.005V) , 0 - 5V (+/- 0.003V)
• Current: 4 - 20mA (+/-0.01mA) , 0 - 20mA (+/-0.01mA)
• Resistance: 0 - 30K (+/-10 Ohm), 0 - 10K (+/-5 Ohm), 0 - 1.5K(+/-1 Ohm)
• Thermistor: 10K, 10K Shunt, 1K Balco, 1K Platinum : All (+/-0.01°C)

Digital Input:

• 8 Channels
• Type: Voltage Free
• Limit: +5V at 500Ohm Resistance maximum

Digital Output:

• 8 Channels
• Type: Relay Contacts, SPSTNO, 48VA at 24VAC, Pilot Duty

Transistor Output:

• 2 Channels
• Type: Open Collector Output, Isolation 3.75KV
• MaxRating: 1A, 60V

Analogue Output:

• 4 Channels (12 bits resolution)
• Type: Current: 0 - 20mA, 4 - 20mA (up to 800 Ohm load), Voltage: 0 - 10V

Mechanical:

• Dimens ion: 187mm x 110mm x 47mm
• Material : UL94 ABS
• Weight: 400g

Input/Output
1) Digital Input
2) Digital Output
3) PWMControl (Open Collector Output)
4) Analogue Input
5) Analogue Output
6) Totali ser
7) Pulse Accumulator